Refractory bricks used in a variety of high-temperature equipment, it is subject to high temperature conditions of physical and chemical erosion and mechanical damage, so the performance of refractory should meet the fol···

Coke quenching is an important part of the coke production process. There are two methods of coke quenching: wet coke quenching and dry coke quenching. Wet quenching using water as a carrier, to achieve the purpose of qu···

10 Defects in Refractory Products Fired In Tunnel KilnsMore related productsFused Cast AZS BlockFused Cast Alumina BlockFused Cast High Zirconia BlockFused Cast Skid Rail BlockWhen firing refractory products in a tunnel ···

1) complete conversion of the quartz, the true specific gravity is low (2.34 or less), a low content of residual silica (1%) when using a small volume change.2) low porosity, bulk density, high strength, good wear resist···

The best corundum content greater than 90%alumina brick, corundum refractory products based crystalline phase. High compressive strength at room temperature (up to 340MPa).High load softening start temperature (greater t···

Aboutrefractory brickdrying process to produce billet crack basic reasons related content to bring you, interested in this knowledge friends do not miss.1, humidity control is not good, the temperature kiln drying of eac···

Water consumption and nature of raw materials, mixing ratio, particle size distribution of raw materials, digestive way, PRESS model and so on. For example: When using cinder as fine aggregate, would need a large amount ···

High load soft. Low creep high alumina brick is super bauxite. Fused alumina, fused mullite refractory advanced as the main raw material.The product has a high temperature creep is small. Corrosion resistance. And good t···

1,insulation bricksbefore clamping should first make insulation bricks in a stable position to be caught in the jaws clamp insulation brick center line.2, remove and place for insulation tiles should be smooth and free o···